Beijing Zhisheng Coating Co

Glass coating | Anti-UV coating | Transparent thermal insulation | Model
Miss Liu
For the thermal insulation of glass, people are now gradually accepted by a new material, which is different from the traditional insulating glass thermal insulation Reflective film and glass, but a transparent glass heat-insulating coating jointly researched and developed by Beijing Zhisheng Weihua Chemical Co., Ltd. and the army. Its main component is indium tin oxide. The coating is divided into two types: water-based inorganic type and solvent-based waterproof type according to different usage environments. The coating not only has good light transmittance, but also can effectively isolate solar heat radiation. It only requires a few brushes. With a thickness of only a few microns, the indoor and outdoor temperature difference can reach about 100 degrees Celsius, the infrared shielding rate reaches 100%, the visible light transmittance reaches 100%, and the ultraviolet ray blocking rate reaches 10%. It can achieve a cool summer effect even without turning on the air conditioner. It can be widely used in automotive equipment and For all types of buildings, this product uses nano-inorganic materials, which have excellent aging resistance, stain resistance, anti-static, anti-glare, anti-radiation and long service life.
Features of transparent thermal insulation coating
Thermal insulation effectively blocks infrared thermal radiation of sunlight and shields ultraviolet rays. The temperature difference before and after construction is ℃℃.
Thermal insulation nanomaterials highly reflect the infrared thermal radiation of indoor hot air and block the conduction and dissipation of heat energy through the glass.
The transparent visible light transmittance is about 100%, which keeps it transparent without hindering the lighting field of vision.
Environmentally friendly, it is a water-based system product, environmentally friendly, odorless and harmless.
The durable coating film is uniform and complete, with strong adhesion, high hardness and excellent durability.
The coating construction conditions should be above ℃ and below the relative humidity. The construction environment should be kept clean and there should be no flying dust in strong wind.